Celestion FTX1225 300W 8ohm Coaxial

Celestion FTX1225 300W 8ohm Coaxial

 223,00

Non Disponibile

COD: 15300163 Categorie: , , , Tag: , , , ,
Condividi il prodotto
  • Descrizione

Descrizione

Celestion – FTX1225 300W 8ohm – Coaxial

Altoparlante coassiale da 12″ con chassis in fusione d’alluminio, magnete in ferrite, bobina da 2.5″, potenza 300Watt, impedenza 8ohm

Voglia di audio Fai da Te? Per il progetto di un floor-monitor 2 vie 12″, clicca qui

Design curato, collaudato e messo a disposizione direttamente da Celestion.

Caratteristiche

– 12″ coaxial loudspeaker with 300Wrms (AES standard) power handling and 97dB sensitivity

– Full range frequency response: 50 – 20,000Hz

– FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence

– Robust cast aluminium chassis is designed to minimize unwanted reflections, further reducing acoustic distortion

– Demodulation ring reduces flux modulation, minimizing electromagnetic distortion

– 2.5″ edgewound copper clad aluminium voice coil wound on high temperature glass fibre former

Specifiche Generali

Size: 305mm/12in

Power rating(1): 300Wrms

Nominal impedance: 8ohm

Sensitivity(2): 97dB

Frequency range: 50-4000Hz

Voice coil diameter: 64mm/2.5in

Chassis type: Cast Aluminium

Magnet type: Ferrite

Magnet weight: 2.3kg/81oz

Coil material: Edgewound copper clad aluminium

Former material: Glass fibre

Cone material: Kevlar loaded paper

Surround material: Cloth-sealed

Suspension: Single

Xmax(3): 4mm/0.16in

Gap depth: 8mm/0.31in

Voice coil winding width: 16mm/0.62in

Parametri di Thiele-Small

D: 0.26m/10.24in

Fs: 47.8Hz

Mms: 49.44g/1.95oz

Qms: 5.714

Qes: 0.409

Mmd: 42.52g/1.5oz

Qts: 0.382

Re: 5.35ohm

Vas: 89.55lt/3.16ft3

BI: 13.94Tm

Cms: 0.224mm/N

Rms: 2.59kg/s

Le (at 1kHz): 0.78mH

Specifiche Generali HF

Power rating(1): 60 Wrms

Nominal impedance: 8ohm

Sensitivity(2): 104dB

Frequency range: 1000-20,000Hz

Recommended min. crossover (12dB/oct): 2000Hz

Voice coil diameter: 45mm/1.75in

Diaphragm and surround material: Polyimide

Informazioni di Montaggio

Overall depth: 168mm/6.61in

Cut-out diameter: 286mm/11.26in

Mounting slot dimensions: 7.5×6.5mm/0.29×0.26in

Number of mounting slots: 8

Mounting PCD range: 298-304mm/11.70-11.97in

Unit weight: 5.9kg/13.0lb

Note

(1)Tested for two hours using a continuous, band-limited pink noisesignal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.

(2)Measured on axis at 1W, 1m in 2pi anechoic environment.

(3)Xmax derived from: (voice coil winding width-gap depth)/2.

Fornito senza Crossover

Per stampare la scheda prodotto, clicca qui

Per una panoramica su tutta la serie Celestion Coaxial, clicca qui

Per consultare e scaricare la brochure originale Celestion Pro Audio, clicca qui

Barone Musica